One-stop LED Lighting Solution Provider

Contact Us
  • LED Stadium Light
  • LED Flood Light
  • LED High Bay Light
  • LED Street Light
  • Commercial Light
  • LED Solar Light
LED Stadium Light View More
LED Flood Light View More
LED High Bay Light View More
LED Street Light View More
Commercial Light View More
LED Solar Light View More
LED Studium Light View More
Products

LED Industrial High Bay Light CR Series

Home / LED High Bay Light / LED Industrial High Bay Light

LED Industrial High Bay Light

  • LED Power: 100W/200W/300W/400W/500W
  • Light effect: Lumileds 3030 chip 140lmW
  • Lens Options: 25°/60°/90°beam angles
  • High chrome plating fins aluminum,Waterproof IP65 design
  • Adopts 6063 die-casting aluminum content,Waterproof IP65 design
  • Inventronics or Meanwell Driver
  • 10-50M INSTALLATION HEIGHT
  • Aluminum Lamp Body Material
  • IP66 IP Rating
  • Custom DESIGN EVERYTHING

Excellent Aluminum Heat Dissipation  

High chrome plating fins aluminum as heat sink with excellent thermal conductivity,the radiation heat of the light source is transmitted to the fins, it can reduce the temperature of the light source quickly and prolong the service life of the light source

Philips Lumileds 3030 SMD Chips

High quality 3030 smd chip,Luminous efficiency 140/W. 75000 hours lifespan,low decay,low heat,stable light,high brightness,high color rendering,low light decay,long service life,built-in high-purity reflectors are anodized and polished,low glare 24°/60°/90° beam angles


High Performance Power Supply

High quality Inventronics or Meanwell Driver,short circuit protection,over voltage protection

Waterproof Industrial LED High Bay lighting Features:


  • Using high chrome plating fins aluminum as heat sink,rapid temperature decrease light source.        
  • Light surface electrophoresis process has a good anti-corrosion anti-fade Built-in high-purity reflectors are anodized and polished.
  • Using Lumileds SMD3030 LED chip.            
  • Ra>80/90.
  • CCT: 3000K/4000K/5000K/5700K/6500K(Warm white/Natural white/Pure white/Cool white).
  • Surge protection options (KV): 10KV or 20KV, according to the actual needs of customers.
  • Photobiological safety class: IEC 62471, EN 62778 EXEMPT GROUP.
  • Testing standard: LM 79-19, EN 13032-1 (all measurements in ISO17025 accredited laboratory).
  • Using Inventronics/Meanwell power driver.
  • IP level is IP65, Can be used Indoor/outdoor.
  • Base: Hook with safety rope.
  • Beam angle: 25/60/90°
  • With two pieces safety cable.  
  • Energy saving than traditional lamp about 70%~80%.
  • Main part of heat dissipation is under the protection of several patents.
  • Installation : Adjustable angle bracket installation.                                                                               


Technical Specs

Model RB-HB-200WCR RB-HB-300WCR RB-HB-400WCR RB-HB-500WCR
Power 200W 300W 400W 500W
Input Volt 100-240V/100-277V/277-480V/AC 50/60Hz
Led Type: Lumileds Chip
Driver NVENTRONICS,MEANWEL
Lumen(Lm/W) 140LM/W
Power Factor: ＞0.98
Power Efficiency: ＞93%
Refractor Optic Aluminum
Housing Finish Powder spraying surface treatment
Housing Colour  RAL9017  Black(Standard)
Light body material Aluminum lamp body + tempered glass
RA Ra>80/Ra>90
Beam angle 25,°60°,90°
CCT 3000K/4000K/5000K/5700K/6500K
IP Waterproof Grade IP65
IK Grade IK09
Surge protection options (KV) 10KV/20KV
Photobiological safety class IEC 62471, EN 62778 EXEMPT GROUP
Testing standard LM 79-19, EN 13032-1 (all measurements in ISO17025 accredited laboratory)
Product Test IES photometric test Ground resistance test Insulation test Withstand voltage test The electromagnetic transmission test Electromagnetic radiation test IP Waterproof test Temperature rise test Work in low temperature test Hot operation test Power temperature cycle test Lightning surge test
Installation Rings/Sling/Bracket
Operating Temperature –35℃~55℃
Work humidity 10%~90%
Mains connection Outgoing cable H05RN-F 3 × 1.0mm2 Length on request (optional)
Warranty/Life Tq =45°,>50000h - L70B50

Feel free to contact us to customize this product. Contact Us

Product Tester Equipment 







  • IP Water-Proof Tester

    Reliable sealing test.Refers to dustproof and waterproof tests of the led light finished housing,to prevent the inflow and penetration of water and dust,protect the electrical components inside the lamp,improve the reliability and product service life.

  • IES Photometric Tester

    The IES test refers to the light intensity distri- bution of the light source (or luminaire) in all directions of space.The curve formed by marking the luminous intensity values in each direction on the polar coordinate graph is the light distribution curve of the luminaire.

  • Integrating Sphere Tester

    The integrating sphere can be used to test the luminous flux,color temperature,luminous efficiency and other parameters of the light source?

  • LED Temperature Laboratory

    Test the performance of led light during storage,transportation,or use in special climate environments such as high temperature,low temperature,and humidity.Test performance in harsh environments.

  • Surge Tester

    Surge Tester:It is mainly to evaluate the tolerance of the led light luminaire to transient voltage and current,which helps to ensure the luminaire will not be damaged or cause danger under its normal use conditions.Simulate overvoltage and overcurrent conditions that may occur under real use conditions,to evaluate the withstand capacity of led light lamps.

  • Withstand Voltage Tester

    Withstand voltage tester:The withstand voltage tester is an instrument for measuring the withstand voltage strength.It can intuitively,accurately,quickly and reliably test electrical safety performance indicators such as led light lamp breakdown voltage and leakage current,and it can be used as a branch high voltage source to test the performance of components and the whole led light.

  • The Grounding Impedance Tester

    The grounding impedance tester:Check the insulation resistance of lamps or lines to ground and between phases,to ensure these equipment lines work in a normal state and avoid accidents such as electric shock casualties and equipment damage.

  • DC Power Supply

    DC power supply:A device that provides a stable voltage or current for led light.It is suitable for automatic timing on and off,aging and testing of electronic components,etc.

  • DC Electronic Load Tester

    DC electronic load tester:Mainly test the DC power supply of led light,with high output impedance,allowing the output voltage and output current to change quickly,and used to measure different power supply parameters.

  • Leakage Current Tester

    Leakage current tester:Test Instruments for Measuring Leakage Current in Low Voltage Environments.Mainly measure the leakage current and electromagnetic interference in the low-voltage environment of led light,with the characteristics of fast measurement and high precision.

  • Packaging Vibration Tester

    Packaging vibration test:Simulate the vibration,drop and other phenomena during the led light transportation,to determine whether the product structure,process and electronic components installation are reasonable,ensure the quality and life of finished lamps.

  • Lifting Tester

    Lifting test:Through multiple lifting operations to check the installation bracket of the led light during the lifting process,the bearing capacity and durability of the housing,to ensure the service life and safety of led light are guaranteed.

  • IK Tester

    Lamp reliability Test.Simulate the collision and drop of led light,and test the anti-collision level of lamp housing,glass,PC lenses,etc.

  • Constant Temperature and Humidity Test Chamber

    Constant temperature and humidity test chamber:Test the performance of finished led light and materials such as housings in various environments(heat resistance,cold resistance, dry resistance,humidity resistance, etc)

  • Salt Spray Tester

    Salt spray tester:Simulate marine erosion environment,test the corrosion resistance of the led light housing


Industrial LED High Bay Light Aging Test

All LED high bay light work at full power during the aging process,and the test time is more than 24 hours.During the aging process of the lamps,the lamps are tested for no less than 3000 times of on/off power,each time the power is turned on for 20 seconds,turned off for 20 seconds.Detect whether there are defective such as dead,dark lights,flickering,and color different. The testers make an aging record every 2 hours.If there is any defect during the aging process,we will stop the test immediately,take out the defective product from the aging rack and make a record.The defective product will be sent to the maintenance department for processing in time.When the abnormal ratio exceeds 3%,IPCQ must report the abnormal situation to the quality supervisor.






Packaging of High Bay Light

Our individual package maximize protecting the lights from transfer damage in transit, Big quantity advised to be shipped by sea,Samples advised to be shipped by express or Air.

  • Label

    Label on backside of each industrial led high bay light and your required label is available.

  • Regular Packing

    This is our regular packing of the led tower crane light,if you need,we can also custom color packing and put your logo on it.

  • Individual Package

    One piece factory high bay industrial light,per carton. At the same time, add foam padding to the box to protect the LED lights during transportation.

  • Individual Package

    One piece led factory light per carton. At the same time, add foam padding to the box to protect the LED lights during transportation..


LED Industrial High Bay/Warehouse Light  Design Simulation

  • LED High Bay Light Simulation

  • LED Warehouse Light Simulation

  • Industrial High Bay LED Light Simulation

  • LED Factory Light Simulation

Versatility in Application

Industrial outdoor/indoor LED High Bay Lights widely used for Highway toll station,gas station, waiting lounge, factory, warehouse Workshop, exhibition hall, production workshop, shopping mall, supermarket, gymnasium, badminton court, goods shelf,high pole tower,cold storage.

Solutions

Versatility in Solutions

We offer comprehensive light simulation and design services to satisfy to the specific needs of our customers.Our team is well-equipped with industry-standard software such as Dialux,which ensures accurate and reliable simulations.Our expertise extends to simulating lighting for a wide range of applications,including outdoor/indoor stadium,industrial warehouse factory,residential and commercial.These can help our clients in visualizing the impact of different lighting scenarios and making the best choices for their projects. Rayborn are committed to providing our customers with innovative lighting solutions that enhance aesthetic appeal,optimize functionality,and achieve optimal energy efficiency.

View More

Let's Answer Your Questions

  • What is the warranty of your LED Industrial High Bay Lights?

  • What color temperature we can choose?

  • High bay light do you have any MOQ?

    We don't have MOQ,even only one piece LED high bay light you can buy.

  • LED Industrial Lighting what's the lead time?

  • How do you help me to save freight cost?

Still have questions? Don't hesitate to contact us for more answers. Contact Us

Get in Touch With Us!

If you are interested in any of our products or would like to discuss a customized order, Please feel free to contact us.

Talk to Our Expert