One-stop LED Lighting Solution Provider

Products

STB Series LED Street Light

LED Parking Lot Light STB Series

  • Input voltage:100-240V/100-277V/AC
  • Power: 60W/80W/100W/120W/150W/200W/300W
  • Light effect: Lumileds chip 140LM-150LM/W
  • Die casting aluminum housing with powder coated finishing Durable housing
  • Integrated photocell sensor
  • 4-20m installation height
  • Aluminum Lamp Body Material
  • IP66 IP Rating
  • Custom design eveything

High Performance LED Driver/Photocell Sensor

High quality isolated IC driver ,short circuit protection, over voltage protection and under voltage protection 100-277V/AC;Complementary dusk to dawn photocell sensor included for automatic light activation.


Highlight Chip+Optical Lens

High quality,high lumen led chip,.more stable light,higher usage,low light decay;Light transmittance up to 99% uniform light output, excellent quality.


IP66 Waterproof

Die-cast and powder coated aluminium housing for IP66 Waterproof/10KV Surgency Protection

High Performance Heat Dissipation Shell  

Die casting aluminum housing with powder coated finishing Durable housing. Rugged die-cast aluminum, scratch and fade resistant. 

LED Parking Lot Street Light Produts Features:

Rayborn LED street lighting is an effective way to illuminate a large area with ease. The shape of the fixture, often square or rectangular, combined with the placement can lead to a widespread scope of lighting that is powerful and effective. Ultra bright led light fixtures are designed to replace 100W to 1000W Metal Halide and High Pressure Sodium shoebox lights in road,parking lots and other public areas.


  • No RF interference,50-70% power savings over conventional lights,LED array provides excellent illumination uniformity and color rendering extremely long life,LED Chips and Driver can be changed according to the requirement,Equipped with High efficiency and power factor led power supply.
  • IP66 waterproof,Photocell sensor,shorting cap,surge protection 10KV,0/1-10V dimmable function optional.
  • Respirator design maintain consistent air pressure inside and outside,discharge backlog or rain and snow.
  • Die casting aluminum housing with phosphate treatment,and powder coated finishing durable housing.Rugged die-cast aluminum, scratch and fade resistant. Excellent appearance of LED Street Light.Beautifully finished aluminum housing,maintenance free.Solid-state construction makes street lights for high shock and vibration resistance.Up to 50,000 hours with very low time-luminosity decay heat-sink is integrated into design,providing excellent heat dissipation and an attractive package.
  • Quick installation connector:Adjustable Angle design to meet different lamp poles, the lamp body is die-cast aluminum with high efficiency cooling;Patent design allows for quick and easy installation, saving time and cost.Bayonet mount connector ensures stable and safe installation, avoiding heavy load danger.4 kinds of installation brackets.Hollow out heat sink design make the lamp weight lighter and have good heat dissipation.
  • Multi-chip LED source offer 140-170lm/W efficiency and better lighting effect for high-bright light fixture.we promise 5 year warranty.
  • Dimmable optional: Photocell, Dali, 0/1-10V dimming is optional,Protection built-in over voltage protection 10KV 20KV SPD as optional.
  • Integrated photocell sensor: Auto ON/OFF function turns lights on at sunset and off at sunrise for convenient and efficient lighting.


    Technical Specs

    Model RB-STB-60W RB-STB-80W RB-STB-100W RB-STB-120W RB-STB-150W RB-STB-200W RB-STB-300W
    Power 60W 80W 100W 120W 150W 200W 250W
    Input Volt 100-240V/100-277V/AC
    Led Type: Lumileds Chip
    Lumen(Lm/W) 140LM/150LM
    Power Factor: >0.90
    Power Efficiency: >89%
    Refractor Optic PC Lens
    Housing Finish Powder spraying surface treatment
    Light body material Die-casting Aluminum +PC Lens +304 stainless steel screws
    RA Ra>80
    Beam angle 80*150°
    CCT 3000K/4000K/5000K/5700K/6500K
    IP Waterproof Grade IP66
    IK Grade IK09
    Control method 1-10V Dimmable/Zigbee Smart control/Bluetooth mesh+Controller/Photocell sensor
    Surge protection options (KV) 10KV according to the actual needs of customers
    Photobiological safety class IEC 62471, EN 62778 EXEMPT GROUP
    Testing standard LM 79-19, EN 13032-1 (all measurements in ISO17025 accredited laboratory)
    Product Test IES photometric test IP Waterproof test Thermal test Grounding resistance test Insulation resistance test Pressure-resistant test The electromagnetic transmission test Electromagnetic radiation test Switching surge test Power temperature cycle test Wind resistance test Cold start test
    Installation Adapter/Square Pole/Round Pole/Trunnion
    Operating Temperature –35℃~65℃
    Work humidity 10%~90%
    Mains connection Outgoing cable H05RN-F 3 × 1.0mm2 Length on request (optional)
    Warranty/Life Tq =45°,>50000h - L70B50

    Feel free to contact us to customize this product. Contact Us

    Product Tester Equipment 







    • IP Water-Proof Tester

      Reliable sealing test.Refers to dustproof and waterproof tests of the led light finished housing,to prevent the inflow and penetration of water and dust,protect the electrical components inside the lamp,improve the reliability and product service life.

    • IES Photometric Tester

      The IES test refers to the light intensity distri- bution of the light source (or luminaire) in all directions of space.The curve formed by marking the luminous intensity values in each direction on the polar coordinate graph is the light distribution curve of the luminaire.

    • Integrating Sphere Tester

      The integrating sphere can be used to test the luminous flux,color temperature,luminous efficiency and other parameters of the light source?

    • LED Temperature Laboratory

      Test the performance of led light during storage,transportation,or use in special climate environments such as high temperature,low temperature,and humidity.Test performance in harsh environments.

    • Surge Tester

      Surge Tester:It is mainly to evaluate the tolerance of the led light luminaire to transient voltage and current,which helps to ensure the luminaire will not be damaged or cause danger under its normal use conditions.Simulate overvoltage and overcurrent conditions that may occur under real use conditions,to evaluate the withstand capacity of led light lamps.

    • Withstand Voltage Tester

      Withstand voltage tester:The withstand voltage tester is an instrument for measuring the withstand voltage strength.It can intuitively,accurately,quickly and reliably test electrical safety performance indicators such as led light lamp breakdown voltage and leakage current,and it can be used as a branch high voltage source to test the performance of components and the whole led light.

    • The Grounding Impedance Tester

      The grounding impedance tester:Check the insulation resistance of lamps or lines to ground and between phases,to ensure these equipment lines work in a normal state and avoid accidents such as electric shock casualties and equipment damage.

    • DC Power Supply

      DC power supply:A device that provides a stable voltage or current for led light.It is suitable for automatic timing on and off,aging and testing of electronic components,etc.

    • DC Electronic Load Tester

      DC electronic load tester:Mainly test the DC power supply of led light,with high output impedance,allowing the output voltage and output current to change quickly,and used to measure different power supply parameters.

    • Leakage Current Tester

      Leakage current tester:Test Instruments for Measuring Leakage Current in Low Voltage Environments.Mainly measure the leakage current and electromagnetic interference in the low-voltage environment of led light,with the characteristics of fast measurement and high precision.

    • Packaging Vibration Tester

      Packaging vibration test:Simulate the vibration,drop and other phenomena during the led light transportation,to determine whether the product structure,process and electronic components installation are reasonable,ensure the quality and life of finished lamps.

    • Lifting Tester

      Lifting test:Through multiple lifting operations to check the installation bracket of the led light during the lifting process,the bearing capacity and durability of the housing,to ensure the service life and safety of led light are guaranteed.

    • IK Tester

      Lamp reliability Test.Simulate the collision and drop of led light,and test the anti-collision level of lamp housing,glass,PC lenses,etc.

    • Constant Temperature and Humidity Test Chamber

      Constant temperature and humidity test chamber:Test the performance of finished led light and materials such as housings in various environments(heat resistance,cold resistance, dry resistance,humidity resistance, etc)

    • Salt Spray Tester

      Salt spray tester:Simulate marine erosion environment,test the corrosion resistance of the led light housing


    LED Shoebox Street Light Aging Test

    All LED street light work at full power during the aging process,and the test time is more than 24 hours.During the aging process of the lamps,the lamps are tested for no less than 3000 times of on/off power,each time the power is turned on for 20 seconds,turned off for 20 seconds.Detect whether there are defective such as dead,dark lights,flickering,and color different. The testers make an aging record every 2 hours.If there is any defect during the aging process,we will stop the test immediately,take out the defective product from the aging rack and make a record.The defective product will be sent to the maintenance department for processing in time.When the abnormal ratio exceeds 3%,IPCQ must report the abnormal situation to the quality supervisor.







    Packaging of LED Street Light/Parking Lot Light

    Our individual package maximize protecting the lights from transfer damage in transit, Big quantity advised to be shipped by sea,Samples advised to be shipped by express or Air.

    • Label

      Label on backside of each led parking lot light and your required label is available.

    • Regular Packing

      This is our regular packing of the street led light,if you need,we can also custom color packing and put your logo on it.

    • Individual Package

      One piece led shoebox street light per carton. At the same time, add foam padding to the box to protect the LED lights during transportation.


    LED Street Light Design Simulation

    • LED Street Lighting DIALux

    • Outdoor Street Light DIALux

    • LED Road Light Simulation

    • LED Street Light Simulation

    Solutions

    Versatility in Solutions

    We offer comprehensive light simulation and design services to satisfy to the specific needs of our customers.Our team is well-equipped with industry-standard software such as Dialux,which ensures accurate and reliable simulations.Our expertise extends to simulating lighting for a wide range of applications,including outdoor/indoor stadium,industrial warehouse factory,residential and commercial.These can help our clients in visualizing the impact of different lighting scenarios and making the best choices for their projects. Rayborn are committed to providing our customers with innovative lighting solutions that enhance aesthetic appeal,optimize functionality,and achieve optimal energy efficiency.

    View More

    Get in Touch With Us!

    If you are interested in any of our products or would like to discuss a customized order, Please feel free to contact us.

    Talk to Our Expert