One-stop LED Lighting Solution Provider


SDC Series LED Stadium Light

LED Sports Light SDC Series

  • Taiwan MEANWELL or INVENTRONICS drivers
  • Philips Lumileds 5050SMD 160-170LM/W
  • Adopts 6063 aluminum content,3 side ventilation design heat dissipation technology
  • Waterproof IP66 design,anti-fog,avoid condensation,Wind Resistance 60M/S,IK10
  • LED Power: 100W-1500W able to provide
  • Lens Options: 8° 20° /40°/ 60°/90°/140*100°beam angles
  • 30-200m Projection Distance
  • Aluminum Lamp Body Material
  • IP66 IP Rating
  • Custom design everything

Rotatable Module and Adjustable Bracket   

Modules beam angle can be rotatable 15 degrees left and right,bracket can be adjustable 270 degrees precisely adjust the light angle

Pure Aluminum Heat Dissipation,Narrow Optics from A High-End Lens

High aluminum content and purity,3 side ventilation design,improve high thermal conductivity,increase heat cooling area,extend light fixture life;Narrow optics 8/20/40/60/90/140*100 Beam angle. against glare,Lens with multiple light angles,light transmittance reaches 93%,best choice for professional lighting engineering.

Additional Round Bracket Plate

High strength mounting bracket,easy installation,suitable for multiple installation requirements; Power supply Box Anti-rust and anti-corrosion, avoid driver exposure,effective protection of driver

Sports LED Stadium Lights Products Features:

  • 1. Taiwan MeanWell or Inventronics Drivers, Lumileds/OSRAM 5050SMD single LED chips 160-180LM/W.
  • 2. RAYBORN engineer team has very rich experience in the field of LED lighting and heat dissipation structure. The SDC Stadium Flood Light adopts finned air convection heat dissipation technology, combined with the special heat conduction characteristics of heat dissipation materials. It is easier to take away the heat on the PCB, so that the inside of the heat sink maintains a constant temperature of 60-70C, and the heat dissipation effect is very good.
  • 3. Bracket can be adjustable 270 degress,Precisely adjust the light angle,Module beam angle can be rotatable 15 degrees,high strength mounting bracket,easy installation suitable for multiple installation requirements.
  • 4. Common is CRI>80, high CRI can customized LEDs with CRI 90 can be suitable for 4K/8K HD broadcasting.
  • 5. Waterproof IP66 design,anti-fog,avoid condensation,IK09,no fear of outdoor harsh environment.Widely used for indoor and outdoor environment.
  • 6. Professional anti-overflow hood to effectively control light spillage and avoid light pollution.Reflector 8° 20° /40°/ 60°/90°/140*100° beam angles are available,meet the requirements of professional light distribution and can be use at different place.
  • 7. Optical Lenses aim to improve light transmittance. precise aiming point of each light module by laser pen, improving the uniformity 10% on the field.
  • 8. Maximum surge voltage (T3) Vmax 20KV.
  • 9. The product design is light weight, such as 1000W 18KG, suitable for the load bearing of most old light poles.
  • 10. Stainless steel bracket can be customized.
  • 11.Offer DMX512 product solution.
  • 12. 100W to 1500W can be chosen, 5 years warranty.

Technical Specs

Power 250W 360W 500W 750W 1000W 1200W 1500W
Input Volt 100-240V/100-277V/277-480V/AC 50/60Hz
Led Type: Lumileds/OSRAM Chip 5050SMD
Led(pcs) 92pcs 138pcs 184pcs 276pcs 368pcs 460pcs 552pcs
Power Factor: >0.98
Power Efficiency: >92%
Housing ADC 12 die-casting  +AL 1070  pure aluminum
Refractor Optic PC
Housing Finish Powder spraying surface treatment
Housing Colour  RAL9017  Black(Standard)
Light body material Light body material Die-casting+1070  pure aluminum lamp body + pc cover +304 stainless steel screws
RA Ra>80/Ra>90
Lumen(Lm/W)  150-160LM/W
Beam angle 8°,20°,40°,60°,90°,140x100°
CCT 3000K/4000K/5000K/5700K/6500K
IP Waterproof Grade IP66
IK Grade IK09
Control method Ordinary, 1/0-10V, PMW, DMX512,DALI,Photocell sensor
Vibration Test Compliant with modified IEC 68-2-6 (0.5G), ANSI C136.31 (3G)IP66
Surge protection options (KV) 10KV or 20KV, according to the actual needs of customers
Photobiological safety class IEC 62471, EN 62778 EXEMPT GROUP
Testing standard LM 79-19, EN 13032-1 (all measurements in ISO17025 accredited laboratory)
Product Standards EN 60598-1; EN60598-2-1; EN62493; EN55015; EN 61000-3-2; EN61000-3-3; EN61547; EN62471 IEC 60598-1:2003;IEC 60598-1:2008; IEC 60598-2-1:1987;IEC 60598-2-3:2002; IEC 60838-1:2004;IEC 60838-2-2:2006; IEC/PR 61341:2010;IEC 61347-1:2007; IEC 61347-2-13:2006;IEC 62031-2008; GB 7000.1; GB 7000.201; GB17743; GB17625.1
Installation diameter Adjustable angle bracket installation,The angle of individual modules can be adjusted
Operating Temperature –35℃~60℃
Work humidity 10%~90%
Mains connection For cable max section 2.5mm2 Outgoing cable H05RN-F 3 × 1.5mm2 Length on request (optional)
Warranty/Life Tq =45°,>50000h - L70B50

Feel free to contact us to customize this product. Contact Us

Product Tester Equipment 

  • IP Water-Proof Tester

    Reliable sealing test.Refers to dustproof and waterproof tests of the led light finished housing,to prevent the inflow and penetration of water and dust,protect the electrical components inside the lamp,improve the reliability and product service life.

  • IES Photometric Tester

    The IES test refers to the light intensity distri- bution of the light source (or luminaire) in all directions of space.The curve formed by marking the luminous intensity values in each direction on the polar coordinate graph is the light distribution curve of the luminaire.

  • Integrating Sphere Tester

    The integrating sphere can be used to test the luminous flux,color temperature,luminous efficiency and other parameters of the light source?

  • LED Temperature Laboratory

    Test the performance of led light during storage,transportation,or use in special climate environments such as high temperature,low temperature,and humidity.Test performance in harsh environments.

  • Surge Tester

    Surge Tester:It is mainly to evaluate the tolerance of the led light luminaire to transient voltage and current,which helps to ensure the luminaire will not be damaged or cause danger under its normal use conditions.Simulate overvoltage and overcurrent conditions that may occur under real use conditions,to evaluate the withstand capacity of led light lamps.

  • Withstand Voltage Tester

    Withstand voltage tester:The withstand voltage tester is an instrument for measuring the withstand voltage strength.It can intuitively,accurately,quickly and reliably test electrical safety performance indicators such as led light lamp breakdown voltage and leakage current,and it can be used as a branch high voltage source to test the performance of components and the whole led light.

  • The Grounding Impedance Tester

    The grounding impedance tester:Check the insulation resistance of lamps or lines to ground and between phases,to ensure these equipment lines work in a normal state and avoid accidents such as electric shock casualties and equipment damage.

  • DC Power Supply

    DC power supply:A device that provides a stable voltage or current for led light.It is suitable for automatic timing on and off,aging and testing of electronic components,etc.

  • DC Electronic Load Tester

    DC electronic load tester:Mainly test the DC power supply of led light,with high output impedance,allowing the output voltage and output current to change quickly,and used to measure different power supply parameters.

  • Leakage Current Tester

    Leakage current tester:Test Instruments for Measuring Leakage Current in Low Voltage Environments.Mainly measure the leakage current and electromagnetic interference in the low-voltage environment of led light,with the characteristics of fast measurement and high precision.

  • Packaging Vibration Tester

    Packaging vibration test:Simulate the vibration,drop and other phenomena during the led light transportation,to determine whether the product structure,process and electronic components installation are reasonable,ensure the quality and life of finished lamps.

  • Lifting Tester

    Lifting test:Through multiple lifting operations to check the installation bracket of the led light during the lifting process,the bearing capacity and durability of the housing,to ensure the service life and safety of led light are guaranteed.

  • IK Tester

    Lamp reliability Test.Simulate the collision and drop of led light,and test the anti-collision level of lamp housing,glass,PC lenses,etc.

  • Constant Temperature and Humidity Test Chamber

    Constant temperature and humidity test chamber:Test the performance of finished led light and materials such as housings in various environments(heat resistance,cold resistance, dry resistance,humidity resistance, etc)

  • Salt Spray Tester

    Salt spray tester:Simulate marine erosion environment,test the corrosion resistance of the led light housing

LED Sport Flood Lights Aging Test

All LED stadium light work at full power during the aging process,and the test time is more than 24 hours.During the aging process of the lamps,the lamps are tested for no less than 3000 times of on/off power,each time the power is turned on for 20 seconds,turned off for 20 seconds.Detect whether there are defective such as dead,dark lights,flickering,and color different. The testers make an aging record every 2 hours.If there is any defect during the aging process,we will stop the test immediately,take out the defective product from the aging rack and make a record.The defective product will be sent to the maintenance department for processing in time.When the abnormal ratio exceeds 3%,IPCQ must report the abnormal situation to the quality supervisor.

Packaging of LED Stadium Outdoor Flood Light

Our individual package maximize protecting the lights from transfer damage in transit, Big quantity advised to be shipped by sea,Samples advised to be shipped by express or Air.

  • Label

    Label on backside of each stadium LED lights and your required label is available.

  • Regular Packing

    This is our regular packing of the led stadium light,if you need,we can also custom color packing and put your logo on it.

  • Individual Package

    One piece led sport high mast light per carton. At the same time, add foam padding to the box to protect the LED lights during transportation.

  • Individual Package

    One piece led stadium flood Light per carton. At the same time, add foam padding to the box to protect the LED lights during transportation..

LED Flood Light Design Simulation

  • LED Stadium Light Simulation

  • Sports Field Light Simulation

  • Football Field Light Simulation

  • LED High Mast Stadium Light Simulation

Versatility in Application

Widely used in advertising board,playground and exhibition hall,stadium lighting,parking lot and airport light,highway and railway tunnel lighting,bridge and culvert lighting.square,garden,and building lighting,sports soccer field,basketball court,baseball ground,softball field,cricket ground,ballpark,baseball field,golf court,football pitch,racetrack,rugby football,volleyball court,hockey ball,wharf and lighting project etc.


Versatility in Solutions

RAYBORN LIGHTING has completed many domestic and international sports stadium projects,including the 2022 Commonwealth Games etc indoor and outdoor floodlight stadium lights 100W-1500W.We can support Dialux simulation according to the customer's project requirements,and design the best lighting system to save customers Low cost,while providing high quality lamps and services.

View More

Let's Answer Your Questions

  • What is the warranty of your LED Sports Field Light

    We offer 5 years guarantee for our LED flood lights,and we will offer you based on your requirements.

  • What color temperature we can choose?

  • Outdoor Stadium Lighting do you have any MOQ?

  • Outdoor LED Stadium Light What's the lead time?

  • How do you help me to save freight cost?

Still have questions? Don't hesitate to contact us for more answers. Contact Us

Get in Touch With Us!

If you are interested in any of our products or would like to discuss a customized order, Please feel free to contact us.

Talk to Our Expert