One-stop LED Lighting Solution Provider

Contact Us
  • LED Stadium Light
  • LED Flood Light
  • LED High Bay Light
  • LED Street Light
  • Commercial Light
  • LED Solar Light
LED Stadium Light View More
LED Flood Light View More
LED High Bay Light View More
LED Street Light View More
Commercial Light View More
LED Solar Light View More
LED Studium Light View More
Products

STE Series LED Street Light

Home / LED Street Light / LED Street Light STE Series

LED Street Light STE Series

  • High-performance Inventronics/Meanwell/Philips driver
  • Input voltage:100-277V/277-480V/AC
  • Power: 50W/80W/100W/120W/150W/200W/250W/300W
  • Light effect: 3030/5050 Lumileds chip 140lm-180LM/W
  • Lens Options:Type II,Type III,Type IV beam angles
  • 4-25m installation height
  • Aluminum Lamp Body Material
  • IP66 IP Rating
  • Custom design everything

Housing Features

UV stabilized polyester powder paint finish for durability and corrosion resistance;Breather effective protect street light; Mounting has leveling adjustment from -10° to +10°, 80° to 100°; Free tools buckle to open the driver box to maintenance.



Tempered Glass+High Quality Chips 3030/5050 SMD

Adopt Philips Lumileds 3030/5050 smd LEDs. Stable performance; Tempered glass+precision engineered individual lenses for maximum light.Micro-lens systems produce IESNA Type II,Type III,Type IV.the light efficiency is upto 140-180lm/W.


High-Performance Inventronics/Meanwell/ Philips Driver

Electrical Isolation switch inside of power box, prevent electric shock caused by improper operation during installation;Surge Protector Device ;Dimming and smart lighting system available upon request.

IP66 Waterproof

Excellent housing design,two parts waterproof design, waterproof performance more outstanding.

Outdoor LED Street Light/Road Lighting Products Features:

STE series LED street light is an effective way to illuminate a large area with ease, Ultra bright led light fixtures are designed to replace 100W to 1000W Metal Halide and High Pressure Sodium shoebox lights in road,parking lots and other public areas.

  • 1. High pressure die-cast aluminum housing,strength and hardness higher,from 30W to 300W.
  • 2. High-performance Inventronics/Meanwell/Philips driver.
  • 3. Philips 3030 / 5050 SMD High luminous efficiency up to 180lm/W, CRI of 80 and 90 is optional.
  • 4. Substantial friction resistant powder spraying process surface treatment,good heat dissipation,Self-cleaness,Smooth body design for self-cleaning dust.
  • 5. Adopt Tempered glass+precision engineered individual lenses for maximum light,single unit’s damage won't affect others' normal work.
  • 6. Optical lens design.Type2,Type3,Type4 optional.Uniform lighting distribution apply to different lighting projects.
  • 7. 10~10°/80° to 100° adjustable bracket box different mounting arm.
  • 8. Electrical disconnector inside of power compartment, prevent electric shock caused by improper operation during installation,Surge Protector Device and imported breather effective protect street light.
  • 9. Excellent operating temperature -40~65°C.
  • 10. With excellent housing design reach IP66/IK09 rating.           
  • 11. Optional 10KV/20KV SPD.  
  • 12.Huge power box is availiable for more Dimming and smart lighting system available upon request.    
  • 13.Long service life over 100,000 hours, 5 years warranty.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 

Technical Specs

STE LED Street Light/Road Lighting Specifications
ting Module Post top or side entry from 42-60Φ
Mounting Tilt Angles 90 Angle adjustable
Operating Temperature –35℃~65℃
Impact Glass Resistance IK09
Storage Temperature –35℃~80℃
Power Factor ≥0.98
Electrical Class Class I
Nominal Voltage 100v-277vac/277-480vac  50/60Hz
Led Chip SMD 3030 / SMD 5050 Lumileds
Lumen 140-180lm/W
LED Lamp Power 50W/60W/80W/100W/120W150W/200W/300W
Driver Brand Meanwell/Inventronics/Moso/Philips Driver
Lens Options TYPE-2/TYPE-3/TYPE-4
Surge protection options (kV) L-N 4KV,L/N-PE 6KV@Meanwell L-N 6KV,L/N-PE 10KV@Moso/Sosen/INVENTRONICS 10kV (optional) with LED signal and thermal fuse to disconnect the load at the end of life 20kV (optional) with LED signal and thermal fuse to disconnect the load at the end of life
Control system 1-10v;0-10v; Dimming, Motion sensor,PLC/Lora smart system
Socket NEMA(3pins/5pins/7pins) and short circuit Cap (optional)ZHAGA Control
Mains connection For cable max section 1.0mm2 Outgoing cable H05RN-F 3 × 1.0mm2 Length on request (optional)
Mains connection IEC 61000,EN 55015,IEC 61000-3-2, IEC 61000-4-5, IEC61547, IEC 61000-3-3, IEC61000-4-2, IEC61000-2-2, IEC 61000-4-11, IEC 61643-11
Main Reference EN 60598-1; EN60598-2-1; EN62493; EN55015; EN 61000-3-2; EN61000-3-3; EN61547; EN62471 IEC 60598-1:2003;IEC 60598-1:2008; IEC 60598-2-1:1987;IEC 60598-2-3:2002; IEC 60838-1:2004;IEC 60838-2-2:2006; IEC/PR 61341:2010;IEC 61347-1:2007; IEC 61347-2-13:2006;IEC 62031-2008; GB 7000.1; GB 7000.201; GB17743; GB17625.1
Lifetime of the LEDs Tq =25°,>80000h - L70 Tq =45°,>50000h - L70

Feel free to contact us to customize this product. Contact Us

Product Tester Equipment 







  • IP Water-Proof Tester

    Reliable sealing test.Refers to dustproof and waterproof tests of the led light finished housing,to prevent the inflow and penetration of water and dust,protect the electrical components inside the lamp,improve the reliability and product service life.

  • IES Photometric Tester

    The IES test refers to the light intensity distri- bution of the light source (or luminaire) in all directions of space.The curve formed by marking the luminous intensity values in each direction on the polar coordinate graph is the light distribution curve of the luminaire.

  • Integrating Sphere Tester

    The integrating sphere can be used to test the luminous flux,color temperature,luminous efficiency and other parameters of the light source?

  • LED Temperature Laboratory

    Test the performance of led light during storage,transportation,or use in special climate environments such as high temperature,low temperature,and humidity.Test performance in harsh environments.

  • Surge Tester

    Surge Tester:It is mainly to evaluate the tolerance of the led light luminaire to transient voltage and current,which helps to ensure the luminaire will not be damaged or cause danger under its normal use conditions.Simulate overvoltage and overcurrent conditions that may occur under real use conditions,to evaluate the withstand capacity of led light lamps.

  • Withstand Voltage Tester

    Withstand voltage tester:The withstand voltage tester is an instrument for measuring the withstand voltage strength.It can intuitively,accurately,quickly and reliably test electrical safety performance indicators such as led light lamp breakdown voltage and leakage current,and it can be used as a branch high voltage source to test the performance of components and the whole led light.

  • The Grounding Impedance Tester

    The grounding impedance tester:Check the insulation resistance of lamps or lines to ground and between phases,to ensure these equipment lines work in a normal state and avoid accidents such as electric shock casualties and equipment damage.

  • DC Power Supply

    DC power supply:A device that provides a stable voltage or current for led light.It is suitable for automatic timing on and off,aging and testing of electronic components,etc.

  • DC Electronic Load Tester

    DC electronic load tester:Mainly test the DC power supply of led light,with high output impedance,allowing the output voltage and output current to change quickly,and used to measure different power supply parameters.

  • Leakage Current Tester

    Leakage current tester:Test Instruments for Measuring Leakage Current in Low Voltage Environments.Mainly measure the leakage current and electromagnetic interference in the low-voltage environment of led light,with the characteristics of fast measurement and high precision.

  • Packaging Vibration Tester

    Packaging vibration test:Simulate the vibration,drop and other phenomena during the led light transportation,to determine whether the product structure,process and electronic components installation are reasonable,ensure the quality and life of finished lamps.

  • Lifting Tester

    Lifting test:Through multiple lifting operations to check the installation bracket of the led light during the lifting process,the bearing capacity and durability of the housing,to ensure the service life and safety of led light are guaranteed.

  • IK Tester

    Lamp reliability Test.Simulate the collision and drop of led light,and test the anti-collision level of lamp housing,glass,PC lenses,etc.

  • Constant Temperature and Humidity Test Chamber

    Constant temperature and humidity test chamber:Test the performance of finished led light and materials such as housings in various environments(heat resistance,cold resistance, dry resistance,humidity resistance, etc)

  • Salt Spray Tester

    Salt spray tester:Simulate marine erosion environment,test the corrosion resistance of the led light housing


LED Street Light Aging Testing

All LED street light work at full power during the aging process,and the test time is more than 24 hours.During the aging process of the lamps,the lamps are tested for no less than 3000 times of on/off power,each time the power is turned on for 20 seconds,turned off for 20 seconds.Detect whether there are defective such as dead,dark lights,flickering,and color different. The testers make an aging record every 2 hours.If there is any defect during the aging process,we will stop the test immediately,take out the defective product from the aging rack and make a record.The defective product will be sent to the maintenance department for processing in time.When the abnormal ratio exceeds 3%,IPCQ must report the abnormal situation to the quality supervisor.







Packaging of LED Street Lighting/Roadway Light

Our individual package maximize protecting the lights from transfer damage in transit, Big quantity advised to be shipped by sea,Samples advised to be shipped by express or Air.

  • Label

    Label on backside of each 200w led street light and your required label is available.

  • Regular Packing

    This is our regular packing of the 150w street led light,if you need,we can also custom color packing and put your logo on it.

  • Individual Package

    One piece led 100w shoe box street light per carton. At the same time, add foam padding to the box to protect the LED lights during transportation.


Outdoor LED Street Light Design Dialux

  • LED Street Lighting Simulation

  • IP66 Street Light DIAlux

  • LED Road Light Simulation

  • LED Street Light Simulation

Versatility in Application

Widely used in Motorways,Major roads,Minor roads,Roundabouts,Crossings and Industrial areas,Parking lot,Yards, and Commercial Streets,Open areas,Squares,Pathways,Residential Quarter,Hotels,Campus lighting etc.

Solutions

Versatility in Solutions

We offer comprehensive light simulation and design services to satisfy to the specific needs of our customers.Our team is well-equipped with industry-standard software such as Dialux,which ensures accurate and reliable simulations.Our expertise extends to simulating lighting for a wide range of applications,including outdoor/indoor stadium,industrial warehouse factory,residential and commercial.These can help our clients in visualizing the impact of different lighting scenarios and making the best choices for their projects. Rayborn are committed to providing our customers with innovative lighting solutions that enhance aesthetic appeal,optimize functionality,and achieve optimal energy efficiency.

View More

Let's Answer Your Questions

  • What is the warranty of your led street lights?

  • What color temperature we can choose?

  • Is it OK to print my logo on led light product?

    Yes. We provide OEM service to our customers,Please inform us formally before our production and confirm the design firstly based on our sample.

  • Can I have a sample order?

  • What files of the LED Lighting can you offer?

Still have questions? Don't hesitate to contact us for more answers. Contact Us

Get in Touch With Us!

If you are interested in any of our products or would like to discuss a customized order, Please feel free to contact us.

Talk to Our Expert